Gilera Nexus start niet meer........?

Dit staat in de service manual van een SR Max 300i
Kans is groot dat het om hetzelfde systeem gaat

Diagnostic code - 2 flashes
A two-flash code shows a system where the con-
trol unit does not show the transponder signal. This
might depend on the inefficiency of the immobiliser
aerial or the transponder.
Turn the switch to ON using several keys: if the
code is repeated even with the Master key, check
the aerial wiring and change it if necessary. If this
is not the case, replace the defective key and/or
reprogram the control unit. Replace the control unit
if the problem continues.
 
Terug
Bovenaan Onderaan