Met beide ervaring;
Kan een heel lulverhaal ophangen maar het komt op het volgende neer.
4 winters gereden, ook met 10 graden onder 0 met 120, geeft een aardige chillfactor van -40 graden.
* Handsvatverwarming, koude handen aan de buitenkant, topjes van je vingers vriezen eraf. Te heet aan de binnenkant ook al had ik 2 standen erop zitten.
* moeilijker aan te sluiten en netjes af te werken. de meeste mensen moeten het toch bij de motorzaak laat doen.
* Elektrisch verwarmde handschoenen, heerlijk.
* makkelijk aan te sluiten, is echt 10 minuten werk.( zelfs voor mij) In de warme periode kan je zelfs heel de boel er weer af halen.
* zit ook 2 standen op, bij -10 gereden en was stand 1 nog steeds voldoende.
* nadeel is het verbindingsdraadje, je moet er dus voor zorgen dat de aansluitstekker bij je contact zit zodat je het niet kan vergeten om los te halen.
Zit bij mij gewoon vast met een tyripje. ( montage valt binnen die 10 minuten)
Conclusie:
Aanschaf van handsvatverwarming is goedkoper als je het zelf aan kan sluiten.
Moet je het laten doen bij de motorzaak, kost het net zo veel als verwarmde handschoenen.
Daarnaast is het simpel om het mee te nemen naar een andere motor bij verkoop als je voor de handschoenen kiest..
http/www.motorcycle-uk.com/giali/Gialiheatedclothing.html
KLAN HEATED GLOVES
£89.99
The Heated Gloves are manufactured from tough, water repellent Cordura from DuPont with a waterproof breathable lining.
External features include an abrasion resistant material around the little finger and across the palm, a suede visor wipe pad on the thumb and an elasticated storm cuff to help prevent water running into the gloves from the sleeves.
Heating elements run across the back of the hand and down to the fingertips to ensure maximum spread of heat and combat the windchill.
The Gloves are available in sizes XS to XXL.
Kit Contents: Gloves, Wiring Harness, ON/OFF Switch, Power Lead.
Power Consumption: approx 2 amps (24 watts @ 12 volts).
KLAN HEATED INNER GLOVES
£59.99
The Heated Inner Gloves are manufactured from Lycra material for comfort.
Heating elements run across the back of the hand and down to the fingertips to ensure maximum spread of heat and combat windchill.
We recommend that you ensure that your outer gloves are not tight when used in conjunction with the Inner Gloves in order to achieve maximum comfort and prevent potential "hotspots".
The Gloves are available in sizes Small or Large
Kit Contents; Inner Gloves, Wiring Harness, ON/OFF Switch, Power Lead.
Power Consumption: approx 2 amps (24 watts @ 12 volts).